8 x 3 RGB ws2812 Neopixel Technic LEDs with header

Description

Connect your interactive lighting to your LEGO Robot with this Technic-sized strip of multicolor RGB NeoPixel LEDs. The LEDs use the ws2812 NeoPixel protocol, so you can chain them with a minimum of wiring. You can use simple Arduino Dupont jumpers, or you can use 3 lead hobby servo connectors. If you want to hide your wires, you can break off the header and solder the leads on the back of this strip.

The easiest way to control your LEDs from your LEGO SPIKE, Technic or MINDSTORMS hub is with the LMS-ESP32 board, but any microcontroller with a NeoPixel/ws2812 library will do. You can use the built-in MicroPython library for NeoPixel LEDs. You can also control the NeoPixel LEDs from your SPIKE Prime official firmware with color matrix emulation.